Method for properly using airflow pulverizer

　　Super-micro gas flow grinding is a more mature ultrafine pulverized device. Unlike other ultrafine pulverized devices, the principle of pulverization is to utilize high-speed airflows, and the energy generated by the nozzle mounted around the cavity, so that the material is intensely impact, collision, friction, and airflow to material. Under shear, pulverized into fine particles. Ultra-micro gas flow is widely used in ultrafine pulverization processing of powder drugs. Its production process continuous, large capacity, and high automation. Moreover, due to the small particle size of the processed product, the particle size distribution is narrow, the purity is high, the particulate activity is high, and the dispersibility is good, and is particularly suitable for the contaminated material that is not allowed to be contaminated.

　　The method of properly uses the airflow pulverizer is well known that the product technology of airflow pulverizer has been widely valued by the industry.

　　Airflow pulverizer is mainly suitable for its wide application of its grinding mechanism, high product fineness, typical materials are: super hard diamond, silicon carbide, metal powder, high purity requirements: ceramic pigment, medicine, biochemical, Low temperature requirements: Medicine. NE, polyvinyl chloride. By increasing the normal air of the gas source into nitrogen, carbon dioxide, etc.

　　Airflow pulverizer and cyclone separator, dust collector and air blower form a complete crushing system. After filtration and drying, the compressed air is injected into the crushing chamber through a high speed sluice nozzle. At the intersection of multiple high pressure airflow, the material repeatedly collides, friction, shear and crushing. Under strength, the thickness, fine product is separated, and the fine particles that meet the particle size requirements are collected by the cyclone and the dust collector by the grading wheel, and the crude particles reduce the crushing area to continue to break.

　　Airflow pulverizer is widely used, everyone knows, so do you know how to use it correctly? There are some things I hope to help you.

　　1. Preparation before booting.

　　Check whether the host, joint, pipeline, and the valve are normal, working properly.

　　2, open the machine

　　(1) Open the compressor power supply, the dust collector pressure valve, and the main air valve, open the air pulverizer power switch, and turn on the power switch.

　　(2) From scratch,Adjust step by step to the specified speed.

　　(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power supply box, set the inverter frequency, and then start charging.

　　(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.

　　3, the order of the downtime: inverter - feeder - Main air valve - Compressor - grade impeller - motor cyclone material, dust removal switch - fan - Main power supply - air compressor.

　　4, Maintenance

　　(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature too high.

　　(2) Checking the wear of impeller, helical conveyors and crushing nozzles.

　　(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.

　　(4) After a filter bag, it should be cleaned or replaced.

　　5. Precautions

　　(1) When the discharge device is run, the unloading port cannot be reached, and the accident occurs.

　　(2) The impeller speed must not exceed the predetermined requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.

　　(3) Regularly check the safety valve to ensure safety.

　　Welcome everyone chooses El Pieces Technology Co., Ltd. The company specializes in the production and development and service of gas flow crusher product technology. The company provides customers with safe and reliable airflow crusher products and services to solve the worries of customers.

　　ALPA7 * 24-hour customer service hotline and 150+ service engineer is ready to stand at any time, there is any problem with the production line to complain, AlPA will give technical advice within 30 minutes, give back to complaints within 12 hours, within 24 hours Provide a clear solution, to arrive at the fault site within 3 days (foreign 10 days).