VSI5X crusher (the latest vertical shaft impact crusher improved from VSI crusher) is necessary crushing equipment used in manufactured sand production line, sand & gravel production plant etc. It is widely used for manufactured sand or artificial sand production. Also, it is the mainstream truing machine for mining and construction industries.
Category: Crusher,crushing equipment,Sulfur
Reading Volume:
Dual purpose balk cargo tray - simplicity of operation, quick switchover of feedstock modes.
Key parts adopt optimization design - reducing wear and use-cost
Rotor optimization design - deepening cavity type to increase yield
Elaborately-designed Emission Mouth and Inner Curve - reducing resistance and increasing throughput
The vertical shaft impact crusher (also known as sand making machine) has two feeding modes: full center feeding: the materials fall into the feeding hopper, enter the high-speed rotating rotor through the central feeding hole, and then are fully accelerated and thrown out through the launching port. First, they collide with a part of the materials that fall freely after rebound, and then impact together on the vortex material lining (or impact block) in the surrounding vortex cavity, First, it is rebounded to the top of the crushing chamber, then it moves downward and collides with the material emitted from the impeller passage to form a continuous material curtain, and finally it is discharged through the lower discharge port. Central feeding is accompanied by annular waterfall feeding: the material falls into the feeding hopper, then falls through the annular hole, and is divided into two strands by the bulk tray. One stream enters the high-speed rotating impeller through the distributor, and the other stream falls from the periphery of the distributor. The material entering the impeller is quickly accelerated in the impeller and then thrown out at high speed. First, it impacts and breaks with another part of the free falling material around the bulk tray, and then impacts on the vortex material lining (or impact block) in the surrounding vortex cavity together, and is rebounded to the top of the crushing cavity, The rear deflects downward and collides with the material emitted from the impeller passage to form a continuous material curtain, which is finally discharged through the lower discharge port.
| Model | Soft material | Hard material | Side and central feeding | Fully central feeding | Speed (r/min) | Power (kw) | Overall dimension (mm) |
| Maximum feeding size (mm) | Throughput (t/h) | ||||||
| VSI5X1145 | 50 | 45 | 500-640 | 250-360 | 1100-1310 | 220×2 | 5000×2790×3320 |
| VSI5X9532 | 45 | 40 | 350-540 | 180-280 | 1300-1510 | 160×2 | 4560×2600×2900 |
| VSI5X8522 | 40 | 35 | 240-380 | 120-190 | 1500-1700 | 110×2 | 4140×2500×2700 |
| VSI5X7615 | 35 | 30 | 150-280 | 70-140 | 1700-1900 | 75×2 | 4100×2330×2300 |
| NOTE: Capacity is according to medium hard limestone.The size,humidity level and characters of materical swill influence the capacity. | |||||||
Dual purpose balk cargo tray - simplicity of operation, quick switchover of feedstock modes.
Key parts adopt optimization design - reducing wear and use-cost
Rotor optimization design - deepening cavity type to increase yield
Elaborately-designed Emission Mouth and Inner Curve - reducing resistance and increasing throughput
Dual purpose balk cargo tray - simplicity of operation, quick switchover of feedstock modes.
Key parts adopt optimization design - reducing wear and use-cost
Rotor optimization design - deepening cavity type to increase yield
Elaborately-designed Emission Mouth and Inner Curve - reducing resistance and increasing throughput