Product Description
Technical Advantages
High Efficiency &High Quality of Finished Products
The grinding curves of the roller shell and lining plate are uniquely designed based on the ultrafine pulverization principle, which makes it easier to form a material bed, improving the grinding efficiency and increasing the proportion of finished products from the primary grinding.
The special pre-compaction device ensures the grinding efficiency and fineness of finished products. Besides, the small vibration of the mill decreases energy loss.
According to the material bed pulverization principle, the materials stay a short time in the mill to reduce the repeated grinding. . As a result, the iron content in the finished products is low and the whiteness and purity of the product are high.
Advanced Separation Technology & Energy Efficiency
The principle of multi-rotor powder classifiers is adopted, so the finished product fineness can be customized as a selected range, with no low-grade material in existence.
By adopting a PLC control system, major parameters like grinding pressure, rotating speed of grinding disc and speed of classifier, etc. can be accurately controlled to achieve the accurate cutting size and stable quality.
Thanks to the use of ultrafine pulverization and multi-rotor separation, the LUM series ultrafine vertical grinding mill saves energy by 30% to 50% compared to a common type mill when producing the powder of the same fineness, which achieves better economic effects.
Intelligentized Control System & Stable Operation
The control mode for pressure adjustment of grinding roller adopts a PLC/DCS automatic control system, which ensures the accurate control of grinding pressure, high efficiency, and stable operation.
An automatic control system enables remote control and simple operation.
Frequency-conversion speed regulation enables the mill to be used for materials of a wide range of hardness.
Environmentally-friendly
Special structural design and operating principle of the mill ensure small vibration and low noise.
The whole equipment is well sealed and the system operates under negative pressure. Therefore, powder and dust are prevented from flowing out of the system. It is environmentally friendly and meets the national environmental protection requirements.
Working principle
The materials drop on the grinding plate center through the screw feeder and evenly move outwards under the action of centrifugal force of the rotating grinding plate driven by the reducer; Large materials are crushed and ground by the grinding rollers when passing through the grinding area, while smaller materials form a material bed by extrusion for further intergranular crushing. The crushed materials continue to move towards the mill edge until being taken into the classifier by the airflow from the air inlet. The powder particles failing to meet the particle size requirement fall back on the grinding plate for further grinding while the qualified powder particles are collected in the pulse dust collector with the airflow and discharged as finished products. However, the iron blocks and other sundries mixed in the materials move along with the materials towards the edge of the grinding plate due to their own weight. They fall into the lower chamber of the mill and then be discharged out of the mill through the slag discharge opening by the scraping plate.
Main specification
Model |
LUM1125 |
LUM1232 |
LUM1436 |
Main unit power(Kw) |
220~250 |
280~315 |
355~400 |
Power concentrator power(Kw) |
1x75/6x15 |
1x110/7x15 |
1x132/8x18.5 |
Fan power(Kw) |
160~200 |
220~250 |
315~355 |
Capacity(t/h) |
10.5~11.5 |
8~9 |
6~7 |
4~4.5 |
3~3.5 |
12.5~13.5 |
11.5~12.5 |
8.5~9.5 |
5.5~6.5 |
4~5 |
14~15 |
12~13 |
11~12 |
7.5~8.5 |
5.5~6.5 |
325 mesh residue on sieve(%) |
0.015 |
0.015 |
0.01 |
0 |
0 |
0.015 |
0.015 |
0.01 |
0 |
0 |
0.015 |
0.015 |
0.01 |
0 |
0 |
Content >2μm(%) |
34±2 |
40±2 |
45±2 |
50±2 |
60±2 |
34±2 |
40±2 |
45±2 |
50±2 |
60±2 |
34±2 |
40±2 |
45±2 |
50±2 |
60±2 |
Average particke size D50(μm) |
4.2±0.5 |
3.0±0.4 |
2.4±0.2 |
1.8±0.2 |
1.4±0.1 |
4.5 |
3.5 |
2.8 |
2.0 |
1.5 |
4.5 |
3.5 |
2.8 |
2.0 |
1.5 |
Size distribution D97(μm) |
30 |
20 |
15 |
10 |
8 |
25 |
20 |
15 |
10 |
8 |
25 |
20 |
15 |
10 |
8 |
Compact apparent specific gravity(g/cm^3) |
1.18 |
1.06 |
0.90 |
0.85 |
0.76 |
1.18 |
1.06 |
0.90 |
0.85 |
0.76 |
1.18 |
1.06 |
0.90 |
0.85 |
0.76 |
Loose apparent specific gravity(g/cm^3) |
0.45 |
0.40 |
0.34 |
0.32 |
0.28 |
0.45 |
0.40 |
0.34 |
0.32 |
0.28 |
0.45 |
0.40 |
0.34 |
0.32 |
0.28 |
Moisture content(%) |
Below 0.3 |
Below 0.3 |
Below 0.3 |
Below 0.3 |
Below 0.3 |
Below 0.3 |
Below 0.3 |
Below 0.3 |
Below 0.3 |
Below 0.3 |
Below 0.3 |
Below 0.3 |
Below 0.3 |
Below 0.3 |
Below 0.3 |
Technical Advantages
High Efficiency &High Quality of Finished Products
The grinding curves of the roller shell and lining plate are uniquely designed based on the ultrafine pulverization principle, which makes it easier to form a material bed, improving the grinding efficiency and increasing the proportion of finished products from the primary grinding.
The special pre-compaction device ensures the grinding efficiency and fineness of finished products. Besides, the small vibration of the mill decreases energy loss.
According to the material bed pulverization principle, the materials stay a short time in the mill to reduce the repeated grinding. . As a result, the iron content in the finished products is low and the whiteness and purity of the product are high.
Advanced Separation Technology & Energy Efficiency
The principle of multi-rotor powder classifiers is adopted, so the finished product fineness can be customized as a selected range, with no low-grade material in existence.
By adopting a PLC control system, major parameters like grinding pressure, rotating speed of grinding disc and speed of classifier, etc. can be accurately controlled to achieve the accurate cutting size and stable quality.
Thanks to the use of ultrafine pulverization and multi-rotor separation, the LUM series ultrafine vertical grinding mill saves energy by 30% to 50% compared to a common type mill when producing the powder of the same fineness, which achieves better economic effects.
Intelligentized Control System & Stable Operation
The control mode for pressure adjustment of grinding roller adopts a PLC/DCS automatic control system, which ensures the accurate control of grinding pressure, high efficiency, and stable operation.
An automatic control system enables remote control and simple operation.
Frequency-conversion speed regulation enables the mill to be used for materials of a wide range of hardness.
Environmentally-friendly
Special structural design and operating principle of the mill ensure small vibration and low noise.
The whole equipment is well sealed and the system operates under negative pressure. Therefore, powder and dust are prevented from flowing out of the system. It is environmentally friendly and meets the national environmental protection requirements.
Technical Advantages
High Efficiency &High Quality of Finished Products
The grinding curves of the roller shell and lining plate are uniquely designed based on the ultrafine pulverization principle, which makes it easier to form a material bed, improving the grinding efficiency and increasing the proportion of finished products from the primary grinding.
The special pre-compaction device ensures the grinding efficiency and fineness of finished products. Besides, the small vibration of the mill decreases energy loss.
According to the material bed pulverization principle, the materials stay a short time in the mill to reduce the repeated grinding. . As a result, the iron content in the finished products is low and the whiteness and purity of the product are high.
Advanced Separation Technology & Energy Efficiency
The principle of multi-rotor powder classifiers is adopted, so the finished product fineness can be customized as a selected range, with no low-grade material in existence.
By adopting a PLC control system, major parameters like grinding pressure, rotating speed of grinding disc and speed of classifier, etc. can be accurately controlled to achieve the accurate cutting size and stable quality.
Thanks to the use of ultrafine pulverization and multi-rotor separation, the LUM series ultrafine vertical grinding mill saves energy by 30% to 50% compared to a common type mill when producing the powder of the same fineness, which achieves better economic effects.
Intelligentized Control System & Stable Operation
The control mode for pressure adjustment of grinding roller adopts a PLC/DCS automatic control system, which ensures the accurate control of grinding pressure, high efficiency, and stable operation.
An automatic control system enables remote control and simple operation.
Frequency-conversion speed regulation enables the mill to be used for materials of a wide range of hardness.
Environmentally-friendly
Special structural design and operating principle of the mill ensure small vibration and low noise.
The whole equipment is well sealed and the system operates under negative pressure. Therefore, powder and dust are prevented from flowing out of the system. It is environmentally friendly and meets the national environmental protection requirements.