Inert gas protection airflow explosion explosion. The whole system has explosion-proof holes in different positions in the whole line, which minimizes the loss during the bursting and explosion caused by the internal pressure and concentration of the system. The motor and other devices used in the whole system are explosion-proof motors, and the sealing performance is better, which effectively reduces the accumulation of dust.The bag dust collector is divided into positive pressure (also known as press-in) and negative pressure (also known as suction), and below will learn about negative pressure. Under negative pressure, the dust pipe enters the dumping, and there is a blocking plate in front of the venting tone, and the coarse dust is fed by hitting and gravity into the gray. The fine particles are filtered. After that, in the inner wall of the filter bag, the gas passed through the gas passes through the bag filter chamber, and the exhaust in the wind turbine is discharged through the exhaust cartridge into the atmosphere. The bag filter is an efficient dust removal device that effectively purifies the air to achieve dust removal. Since there is a temperature of 550 °, the bag dust collector is unable to get used to this environment, so it is necessary to give the bag dust collector to cool down: Set a gas cooler in the bag filter, which can help the temperature, air and water in the air, and some cool breeze and water are cold. These cool breeles and cold water can assist in coolants of flue gas, and then decrease the warmth of the bag dust collector. The bag filter can be installed at high temperatures. This cool air valve mainly avoids some high temperature flue gas into the dust collector. It is a function of conditioning, and one end is connected to the high temperature pipeline. The other end is connected to the atmosphere. Therefore, before using the bag dust collector, ZUI is a device, so that the function of the dust collector can be greatly carried out, nor does it damage the dust collector due to high temperatures cannot be accepted. Some low temperature flue gas can be appropriately mixed, and if the temperature of the gas is different in the dust collector, first mix a portion of the low temperature gas into the high temperature flue gas, so that the gas is mixed, so that the temperature in the dust collector does not As for so much. In the bag dust collector, the air box pulse bag dust collector adopts the smooth flow design, that is, the airflow is entered by the upper casing of the dust collector, and is discharged from the lower casing of the lower casing. The direction of flow is coincident with the direction of pulse blowing and the dust falls in the dust, and the purified air does not turn over the throat pipe, which greatly reduces the dust resistance, reducing the wind turbine load, saving power consumption, It is conducive to dust settlement.
ALPA Powder Technology Adhering to "Refers to Movement,"The new customer service concept, from the user's needs, the user's application status, greatly improves the safety performance of the machine, saves the customer to save labor, reduce production costs. Advanced design concept, superb manufacturing process, The perfect quality system, a meticulous service attitude! It is an Alpa people who have the "AlPa Powder Technology" to each user's eternal commitment and thinking.