Detailed explanation of airflow pulverizer operation process
The inert gas protective gas flow grinding timely release static electricity and eliminating ignition source. The pulsed anti-blow collector can eliminate static electricity in time, while ensuring the pulse clear ash clean thoroughness. The equipment is all metal components, all grounded to try to release powder static electricity.
The airflow pulverizer operation process is mainly divided into boot, after boot, stop, maintenance, and precautions. The following Shandong Yelai Powder Technology Co., Ltd. introduces you the detailed operational process of the gas flow crusher.
1. Preparation before booting
Check the host, accompaniment, pipeline, and valve, etc., whether it is intact, whether it works fine.2. Power on
(1) Turn on the compressor power supply, dust collector pressure valve, the main gas valve, and then open the power switch of the airflow pulverizer and turn on the power.
(2) Start the grading wheel from zero, gradually adjust to the specified speed.
(3) Open the fan, the cyclone separator, dust removal, and the power supply, then open the total power supply of the feed bun, set the frequency of the inverter, and then start the addition of pulverization. (4) The particle size of the finished product can be adjusted by the grading wheel frequency and the amount of add.
3. Downtime
Downture Sequence is: inverter - Takers - Air Pare Valve - Compressor - Section Impeller Motor - Cyclone Distribution, Dust Dust Output Switch - Fan - total power supply - air compressor.
4. Maintenance
(1) The motor should be lubricated regularly, but the lubricating oil should not be too much to prevent the bearing temperature too high. (2) Hierarchical impeller, spiral feeder, and smashing nozzles should be appreciated, and the tightness of the transmission belt should be appropriate.
(3) After a crushing material is a certain period of time, the attachment powder inside the machine is cleaned to avoid blocking, thereby affecting the pulverization effect. (4) After the filter bag is used, it is cleaned, or replaced.
5. Precautions
(1) When the unloader is running, unloadingThe exit cannot be extended to avoid accidents. (2) The rotational speed of the impeller cannot exceed the specified, otherwise the temperature is too high, damage the impeller and motor.
(3) Safety valve or the like to be verified regularly to ensure safety. ALPA Powder Technology adheres to the new customer service concept of "refers to one move, automatic", from the user's needs, users' application status, greatly improve the safety performance of the machine, saving the customer Reduce production costs. Advanced design concept, superb manufacturing process, perfect quality system, meticulous service attitude! It is Alpa people who adhere to the "AlPa Powder Technology" brand for each user's eternal commitment and thinking.
