Talking about the secrets of the ultrafine airflow crusher to maintain "health"

　　After a long-term development, with the continuous improvement of industry research and development capabilities and technical processes, the type of gas flow grinding product is increasing, mainly flat air flow, circulating tube gas flow grinding, rough gas flow mill, fluidized bed gas flow grinding , Target gas flow mill, supersonic speed flow mill, etc. With the continuous improvement of science and technology, the application of high-performance materials and new materials is increasing. The performance and quality requirements of the downstream industry have continued to improve, and the new gas flow is constantly developed.For people, life is unavoidable. For ultrafine airflow crushers, they will experience the same life process. If we care, let it keep "health", then it It is natural to use life, and if we don't know how to cherish it, it can only be scrapped early.

　　Ultra-fine gas flow crusher not only pushes a new level of technology, but also has a great convenience in our lives. Then let the ultrafine airflow pulverizer maintain a healthy small computation has the following recommendations, I don't know if I can help everyone. 1. The pulverizer should be fixed based on the cement. For frequent changes in work, the pulverizer and the motor are mounted on the base made of angle steel.

　　2, after the pulverizer is installed, check the fastening situation of each component, while checking if the transmission is suitable, the motor shaft and the pulverizing shaft are parallel.

　　3, before the pulverizer starts, first turn the rotor, check whether the operation is flexible, there is no collision in the casing, whether the rotation direction is correct, whether the motor and pulverizing are lubricated.

　　4. After the pulverizer is started, it should be idled for 2-3 min, and there is no abnormality.

　　5, do not replace the pulley casually to prevent the speed of the speed or too low.

　　6, carefully check the material, so as not to enter the crushing chamber, such as metal, stone, etc.

　　7, the feed should be uniform. If there is a phenomenon that there is a negligence, the bearing and the body temperature is too high or the outer injection, should be immediately stopped, and the fault should be eliminated.

　　8, stop the feeding before the stop, after the material is removed, and then cut off the power supply. Cleaning and maintenance after downtime.

　　9. After the crushing machine is 300h, it is necessary to clean the bearing, replace the oil; when the oil is installed, 1/3 of the housing gap is good, up to 1/2. Long timeWhen the shutdown is stopped, the belt should be detached.

　　ultrafine gas flow pulverizer often can't use long, and if we can guarantee its "health", it will definitely "longevity."

　　AlPa Powder Technology has been adhere to the initial heart, helping all walks of life to increase the intensity of ecological environment, accelerating the pace of industrial adjustment and upgrading, driving air quality continuous improvement, and strive to achieve high quality. In the future, ALPA Powder Technology will adhere to the "high-quality design, high quality development" concept, and actively contribute to the construction of social and economic development and ecological civilization. With a high sense of responsibility and mission, a solid foundation for the social environment and the health and sustainable development of enterprises, providing a solid guarantee for further economic benefits, environmental benefits, and social benefits.