Ceramic liner airflow pulverizer solves the problem of material adhesion

　　The full protective ceramic liner airflow pulverization charter has the following performance advantages: dry pulverization of various materials suitable for the Moh's hardness 9 or less, is particularly suitable for high hardness, high purity, and high value-added materials. The breakthrough of particle acceleration technology has greatly improved pulverization efficiency, reduced energy consumption, small pulverization, good particle shape, and no large particle size and no large particles, and the product particle size D97 = 3-74 microns were arbitrarily adjusted. During the pulverization, due to the sharp expansion of the airflow, the airflow temperature is lowered, especially suitable for the heat sensitive, low melting point and the volatile material. The material collides with each other, which is different from mechanical pulverization relies on the impact of the material or a hammer, and plus all-round ceramic liner, so the equipment is small, and the product is purity. It can be used in series with multi-stage airflow classifiers, and products producing multiple particle size sections at a time. The ceramic liner is pulverized, the equipment is compact, the disassembly and cleaning is convenient, and the inner wall is smooth without dead angles. The entire system is fully negatively pressed, no dust, low noise, clean environmental protection.Some materials may have adhesiveness in the pulverization process because of their special material properties, resulting in blocking or agglomeration phenomenon, bringing considerable trouble to smashing work. After long-term experience accumulation and continuous innovation, the adhesion of material adhesion is specially introduced

　　ceramic liner airflow pulverizer.

　　Fluidized bed gas flow pulverizer for all overcurrent components using high hardness engineering ceramic material, is a high hardness brittle material, an elastic plastic material, a cohesive material, a fibrous material such as zirconium, aluminum oxide, and a golden redite titanium powder. , Zirconia, talc, kaolin, graphite, coatings, pesticides, fertilizers and pollen, food raw materials, etc. Ideal pulverized equipment. The ceramic liner gas flow pulverizer not only has the advantages of general fluidized bed airflow pulverizer, but since the liner of the machine uses high-strength wear resistant high temperature engineering ceramic, it can not only adapt to high temperature overheating of up to 400 ° C. The steam works, and there is no contamination of the pulverized materials, which is a high quality ultra-fine and pulverized must-choose equipment; at the same time, the cost of ultrafine pulverization of airflow is mainly the cost of pulverization, and the overheated steam fluid is compared to the compressed air. The cost is reduced by one-quarter. In addition, the superheated steam working fluid does not produce static electricity, so it does not produce a sticky wall, so it is suitable for some of the materials that will stick to the wall with compressed air, such as: titanium white powder .

　　Ceramic liner airflowThe pulverizer is mainly composed of a feed apparatus, a pulverizing chamber, a discharge opening, a vapor distribution tube, and a nozzle. The material of the feed nozzle and the pulverized nozzle is made of high strength wear resistant high temperature-resistant alloy, the nozzle structure is an ultrasonic design; the remaining overcurrent component is manufactured in high-strength wear resistant high temperature engineering ceramics, of which feeding Wenqi , Ceramic rings, discharge ports, ceramic lids, and ceramic lids are high-intensity reaction sintered silicon carbide materials; parts of steam distribution tubes and host jackets are made of stainless steel and polished, and the whole machine is beautiful and compact. The ceramic lining airflow pulverizer can be used with the airflow classifier. It is based on the physical properties and finished purity requirements of the material. In the internal lining ceramic sheet, the wear resistance, reduce the impact of the material, and increase the use of the equipment. Life, and accurately control the iron content of the material in the pulverization process. Successfully solved a series of problems such as battery material adhesion, not fine, and unsteady. Ceramic liner airflow pulverizer working principle: After the compressed air is filtered, the pulverizing cavity is sprayed through the Raval nozzle, and the trap is repeatedly collided with the intersection of the high-pressure airflow, friction, and pulverized the thick mixture after pulverization. Under the action of the fan, the coarse fine product is separated under the power of the high-speed rotation of the hierarchical turbine, and the material reaching the particle size required by the grading wheel into the cyclone separator and the dust collector, and the crude particles drops to the pulverizing region continue. Smash.

　　The ceramic liner airflow pulverizer has the following performance advantages:

　　1, dry pulverization of various materials suitable for the following materials, especially suitable for high hardness, high purity, and high value-added materials .

　　2, the breakthrough of particle acceleration technology, greatly improves the pulverization efficiency, reducing energy consumption, small pulverization, good granular shape, narrow particle size distribution, no large particles, product particle size D97 = 3-74 microns Arbitrary adjustment.

　　3, during the pulverization process, due to the sharp expansion of the airflow, the airflow temperature is lowered, especially for thermal sensitivity, low melting point, and volatile material.

　　4, the material collides with each other, is different from mechanical pulverization, depending on the impact of the material or a hammer, etc., plus all-round ceramic liner, so the equipment is small, and the product is purity.

　　5, can be used in series with the multi-stage airflow classifier, producing a plurality of particle size sections at a time.

　　6, ceramic liner airflow pulverizer equipment compact, disassembly and cleaningConvenient, the inner wall is smooth without dead angles.

　　7, complete system full negative pressure closed operation, no dust, low noise, clean environmental protection.

　　8, the dust collector adopts "El Pieces Technology" special anti-stick dust collector technology, eliminating problems such as negative pressure and hyperanerators.

　　For the next overseas expansion, the General Manager of the ALPA Powder Science and Technology said that Alpa Powder Technology is very clear and full of confidence. In the future, AlPa Powder Technology adheres to innovation, quality, service, and constructs "global sales" system to form a global competitive manufacturing enterprise.