What are the maintenance inspections of the gas flow crusher?
Super-micro gas flow grinding is made of a large part of a crusher, a cyclone separator, a pulse dust box and a fan, has a variety of overall performance, production process, uniform, no screen, non-mesh, uniform particle size. Continuous progress. It utilizes the relative movement between the active gear disc and the fixed tooth disc, or the gas high speed flows the material to obtain the material to teeth impact, friction, and materials from each other, and the powder is pulverized by the rotating centrifuge and the air machine. Enter the cyclone separator, then passed through the shutter, dust into the pulse dust cleaning tank, and the filter is adjusted by filter cartridge and recovery. The whole machine is designed according to the GMP standard, all of which are made with stainless steel materials, and there is no dust in the production.In the previous article, El Pai Xiaobian has already explained many times, I believe that everyone has been very understanding, and now no longer repeat. In the past, El Pie Xiaobian was briefly introduced
5 most maintenance inspections of airflow mill. In addition to 5 most, there are other components that require Timed inspections. In the specific parts, let's take a look at the El Pie.
Operation and maintenance of pulse bag filter
1, the airflow pulverizer solenoid valve operates the environment, check once every three months, and clean the dust. Check the complete situation of the filter bag every six months and replace it.
2, the air outlet, if there is a routing, check whether the filter bag is detached and damaged. Whether the frame presses loose, the gasket is aging, and replaced.
3, the pulse controller and solenoid valve check whether it can work properly before booting.
Control cabinet
Airflow pulverizer control cabinet pays attention to dustproof, in use, the control cabinet door is held, and dust is prevented from entering. Painting the dust every half a month, preventing contact with poor contact.
About Component repair inspection of the fluidized bed airflow pulverizer, it is necessary to end. I don't know if everyone has learned. If there is still unclear, it is recommended that everyone will combine the previous article. Look together, this will be greater, we will only master the right maintenance inspection method, we can make better results, master the problem, you don't have to have a headache again. I hope that Xiaobian will bring the things that will bring it.Everyone is useful.
In terms of quality inspection, AlPa Powder Technology is especially stricter for detail. It is well known that a manufacturing process of a ultrafine powder is often up to hundreds. As a special equipment, the airflow pulverizer is like a special process, and it is possible to make a big disaster. Therefore, ALPA powder technology has established seven process stop points in the production process, which is strictly controlled by different engineers, and each other is independent and mutual supervision, and it is timely discovery and solve the problem. Any detail is unqualified, it is unable to enter the proceeding process, which is the quality monitoring of AlPa powder technology to the production process.
