Airflow pulverizer responds to equipment inspection before each use

　　Ultra-micro gas flow grinding is to overcome the internal cohesive force of the solids in the internal cohesion of the solids by mechanical or fluid power, thereby pulping 3 mm or more of the material particles to 10-25 microns. It was a high-tech of a material processing that was generated by the development of modern high-tech after the 1970s.

　　As is well known, if the airflow pulverizer will affect its normal use, production is stagnant, causing economic losses. Professional airflow pulverizer manufacturers generally require a test for the gas flow crusher before use, mainly to check if the indicators of the airflow pulverizer are normal, which will avoid a lot of equipment failure More losses. What should I do if I should do? Let's take a look at it.

　　1. Feed mouth backwashing injection: Improper tunnel adjustment, screen, conveying pipe clogging, shortage of short or gas permeability, and severe hair blade surface wear. They will cause anti-spray in the feed port. When this phenomenon occurs, it should first identify why, then take targeted elimination measures, or adjust the damper cleaning, or replace the powder bag, increase gas permeability, or replace the hammer.

　　2. Bearing overheating: When the bearing lubrication is poor or damaged, or the spindle is bent, the rotor is severely imbalance, the belt is overheat, the bearing will overheat. The bearing can return to the normal state by adding and replacing the lubricant, replacing the bearing and the spindle, balance the rotor and adjust the belt.

　　3. Strong vibration of pulverizer: The following reasons may result in strong vibration of pulverizer:

　　(1) Hammer mounting is wrong;

　　(2) The corresponding two sets of hammers are too large;

　　( 3) Bearing damage or spindle bending;

　　If the hammer is arranged incorrect, it should be rearranged according to the manual; if the corresponding two sets of hammers are too large, the weight should be balanced, and the weight is not more than 5 grams; if the bearing Damage or spindle bending should be replaced in time; if the connection screws of the feet are loose, it should be tightened.

　　The above is to introduce the airflow pulverizer to check the work before the equipment is run, and if there is an emergency situation to solve. Airflow crusher equipment is available in the field, finished productHigh fineness, high level precision, with air compressor, cold dryer, cyclone collector, dust collector, air machine, control cabinet, etc., can be widely used in non-metallic mine, medical Many industries such as food, ceramics, environmental protection, new energy, battery materials.

　　According to customer needs, ALPA can provide three logistics and transportation: the closer customer can go to the ALPA factory, and customers can also provide delivery on-site service, but It will charge a certain fee (including fuel fees, crossing fees, etc.). You can also entrust the logistics company for transportation. Under normal circumstances, customers need customers to pick up their own goods from nearby logistics sites. If the customer wants to shorten the transportation time as much as possible, the ALPA can deliver the logistics line to send the puller directly to the user's designated place. This way is fast, but relatively, the cost is higher than other ways.