After the airflow crushing equipment uses a period of time, it may appear

　　After a long-term development, with the continuous improvement of industry research and development capabilities and technical processes, the type of gas flow grinding product is increasing, mainly flat air flow, circulating tube gas flow grinding, rough gas flow mill, fluidized bed gas flow grinding , Target gas flow mill, supersonic speed flow mill, etc. With the continuous improvement of science and technology, the application of high-performance materials and new materials is increasing. The performance and quality requirements of the downstream industry have continued to improve, and the new gas flow is constantly developed.

　　With more and more airflow, the device is in use, and the problems encountered during use may also increase. Sometimes users can solve themselves, some may require manufacturers' technical support to solve. Airflow

　　The case of frequent wear of components in the device and how to solve.

　　When the airflow pulverizer is used for a period of time, the particles may be thicker. So, how should we handle this situation? Thomele particles mean that production may decrease. This may include the wear of blades, bushing and other components. These commonly used components require daily maintenance. At the same time, it is also necessary to check the wear condition regularly. If wear is serious, please replace it now. Otherwise, the particle size becomes thicker.

　　The better the daily maintenance of the gas flow, the longer the service life, the longer the service life is The higher the value you created.

　　Airflow Mount Machine installation and commissioning

　　1. After the machine is in place, it should be placed smoothly and secured with a leg screw.

　　2. The inner cavity of the machine should be cleaned before the trial run, and the front cover is used to lock the star handle.

　　3. Pay attention to whether the machine has abnormal noise during the test to park and check in time.

　　4. Install the storage bag in the unloading hopper.

　　5. After opening the power, pay attention to the order of the power supply, rotate the spindle according to the direction indicated. .

　　airflow Machine operation and precautions:

　　1. Before use, check if all fasteners of the machine are fastened, and whether the belt is fastened.

　　2. The direction of operation of the spindle must conform to the direction of the arrow shown on the shield, otherwise it will damage the machine, and may cause crush damage of the body.

　　3. Check if the machine is pulverized There is metal and other hard debris, otherwise the airflow is pulverized machine and affects the operation of the machine.

　　4. The oil cup on the machine should constantly inject the lubricant to ensure the normal operation of the machine.

　　5. Regularly check whether the grinder is damaged by the screen, if it is damaged, it should be replaced immediately.

　　6. Check if the electrical appliance is complete.

　　7. When using this unit, the connecting handle of the cover must be tightened to avoid an accident. .

　　8. The purity of the material must be checked before crushing, and the metal debris must not be mixed to avoid the airflow Crush

　　Machine or cause combustion and other accidents.

　　9. Stop before shutdownFeeding. If you don't continue to use it, you will take out the left.

　　ALPA powder technology has been born in 20 years, has always been adhering to the scientific management model of modern enterprises, insisting on "devout, fine, strict, Harmony "is the spiritual concept, while" pursuing excellence, casting dawn brand, revitalizing national industries "as a strong development tenet.