What are the basic requirements of the gas flow crusher on the working gas?

Innovative food development, such as nano-selenium and zinc food, functional health food, entertainment and leisure food, life-saving and military food, nano-bio-conserved agent, etc. Ultrafine pulverization and nanotechnology in the air flow.

The airflow pulverizer itself is a relatively sealed system. It does not have a certain communication with the outside in the production process. We only need to control two docking points when using it. If we add a unit After the pulverization, the discharge port can be very good to ensure a sterile docking and material transfer, which saves a lot of expenses, the important problem of sterile crushing fabrics is,

Airflow pulverizer

It is not very good, and the material adhered to the pipe and the inner wall may not be discharged in time, causing the material to lose loss during the CIP process, so as far as possible

airflow pulverizer

The polishing effect of the inner wall is done, 0.1 or 0.2 is possible.

The other problem is the process of CIP. If the material forms a relatively hard block in the pulverization plate, it is impossible to use manual to clean, and it is necessary to manually assist and cleaning and then doing CIP. The airflow pulverizer is set into a set of pulverization systems. After the compressed air is dried, it is sprayed into the pulverizing chamber by the Lavar nozzle, and the material is repeatedly collided with the intersection of the multi-high pressure airflow. Airflow movement to the grading area. High-pressure gas (compressed air, superheated vapor or other gas) inserted around the pulverization chamber and the high-speed air flow of the feed-proof solid material particles.

The basic requirements of the gas flow pulverizing machine on the working gas are: oil-free, dry, pressure is 06 ~ 1.2 MPa, the medium gas can be air, inert gas, superheated steam, and the like. Therefore, the gas compressor may be an air compressor or a nitrogen compressor or an overheated steam produced by the boiler. The compressor is divided into two kinds of oil lubrication and oil-free lubrication, and there is a piston and screw type two, and the oil-free lubricating compressor has piston and sliding sheets. With an oil-lubricating compressor, it is necessary to increase the liquid vapor separator and multi-stage oil filter on the gas source. Gas dryer has a frozen in a suction device (atmospheric dew point 19 ° C) and adsorbent dryers (including no hot regenerative dryers and microstructured regeneurizers, atmospheric dew points 40 ° C), and the like.

To reduce customer pre-investment, reduce project investment risks, improve product competitiveness, and ALPA provides customers with processing services to meet customers' diversification needs. Can be processed by battery materials, environmentally friendly desulfurization, building materials and solid waste, non-metallic mines, pharmaceuticals, food / cosmetics / health products, fine chemicals, powder metallurgy, high-tech materials, and other materials.