Multi-level airflow grading machine with carbon steel, stainless steel, carbon steel

　　Ultra-micro gas flow grinding is to overcome the internal cohesive force of the solids in the internal cohesion of the solids by mechanical or fluid power, thereby pulping 3 mm or more of the material particles to 10-25 microns. It was a high-tech of a material processing that was generated by the development of modern high-tech after the 1970s.

　　Multi-level airflow classifier which is a good trust recommend Shandong El Piese Technology Technology Co., Ltd. has a design, construction team of professional and technical personnel, fully guarantees the quality of the product and the requirements of customers. Shandong El Piese Technology Technology Co., Ltd. has a development and design center, steel workshop, integrated management department and other departments.

　　Multi-stage airflow classifier performance characteristics: 1, large yield, low energy consumption, high grading efficiency.

　　2, the particle size is concentrated: the machine uses a single CHUANG vertical impeller. Stable grading technology and special sealing measures effectively prevent the leakage of coarse grains, so that the product is not large, the particle size is concentrated, and the grading precision is high.

　　3, the structure is reasonable: 1-6 granular products can be produced simultaneously according to user requirements.

　　4. Strong applicability: combination of closed or open portions can be combined with various mill (air current pulverizer, mechanical grinding, ball milling, Raymond mill, vibration, etc.).

　　5, high automation: all level impeller classifier adopts electronic frequency modified speed regulation, automatic circulating multi-box dust collecting process to achieve electronic control, automatic cleaning, improve the stability of the overall pressure.

　　Multi-level airflow classification machine maintenance method:

　　1, all lubricants are lubricated with sodium based grease or calcium based grease.

　　2, each class should look at whether the internal lubricant of the speed reducer is on the oil needle line, and the oil is changed every 6 months.

　　3, often check whether the lower support or intermediate shaft, bearing, and the seal are wear, whether the shaft tile is damaged to replace it in time.

　　4, bearing lubrication must be pressing high-pressure oil to the bearing every 4 hours to maintain the sealing performance of the bearing.

　　For multi-stage airflow classifiers, the equipment produced by our company mainly has three types of carbon steel, stainless steel, carbon steel plus wear-resistant protection. According to the characteristics of different materials, our professional technicians will recommend you. Suitable equipment

　　Carbon steel multi-level airflow classifier overall cost is lower than stainlessSteel and carbon steel are wear-resistant and protective, customers can achieve interest zui in lower prices. For materials applied to food, medical YAO industry, the stainless steel equipment is usually used, so that pollution is not constituted during the grading process. For materials such as quartz and other materials, using carbon steel plus internal ceramic wear protection to extend the service life of the equipment and reduce the frequency of replacement parts.

　　Multi-level airflow classifier in the kaolin industry is widely used, and kaolin is a non-metallic mineral composition composed of kaolinite as the main minerals, mainly used for daily ceramics, building sanitary ceramics and refractory ceramics. Fixed or white pigments such as paper, architecture, coatings, rubber, plastics, textiles, have been applied in many industries.

　　The kaolin mainly relies on mechanical crusher and airflow pulverizer for fine deep processing. The mechanical pulverizer is generally smashed to 700-1000 mesh, but because he is mechanically smashed, ZUI has increased the iron content in the product, which is not suitable for the industry that requires purity. The airflow pulverizer can be smashed to 1000-5000 mesh, and the particle size of the product produced is thinner and purity. For industries that apply purity requirements, it should be selected for multi-stage airflow classifiers

　　At present, artificial intelligence and Internet of Things have been increasingly used to various fields, AlPa Powder Technology as a family. It has always adhered to the technology innovation industrial powder equipment manufacturer, and has also explored in the application of artificial intelligence and Internet of Things.