Fluidized bed airflow mill which is a good service of Shandong Erfa powder

　　The problem of ordinary ultra-micro gas flow is: high manufacturing cost, large investment, high energy consumption, too much powder processing, so that it is also subject to certain fields; difficult to make submicron Level products, product particle size is best in 10 um, and the output is sharply decreased at 10 um, and the cost is rapidly rising; the single-machine handling capacity of gas flow is smaller (both less than 1 ton hour, can not adapt to large-scale production needs; The wear problem of equipment processing accuracy and material is still plaguing equipment manufacturers and factory users.

　　Fluidized bed airflow pulverizer which is a good Shandong El Pie Powder Engineering Technology Co., Ltd. strives to pass advanced technology, Quality products, preferential prices, complete services, bring customers ZUI big interest!

　　Fluid bed airflow pulverizer is very common in our production and life. We are able to use it correctly At the same time, we should also understand what it is, the most important thing is the price.

　　At the time of purchase, the price is the question of each buyer. Let's take a look.

　　1. There are two static and dynamics in the airflow pulverizer. Is there a difference in the price?Static and dynamic crushers in the crusher, they are pulverized in the airflow On the price, there is obvious difference, because of the static, it only needs to compress the air, you can complete the crushing work, and the dynamic, it is not as simple, so it is reflected in the price, it is definitely different. The laboratory crusher in the airflow pulverizer is related to equipment production capacity?

　　The laboratory airflow pulverizer in the pulverizer, its price is related to equipment capabilities, so this Question, its answer is. Moreover, there is a great correlation between the prices and crusher prices and crusher prices. However, there is no relationship, but there is no relationship. It is generally in the range of 5-40um.

　　The smaller the particle size of the raw material of the fluidized bed gas flow, the higher the pulverization efficiency, the greater the particle size of the raw material, then the crushing effect is relatively low. Pressure pressure In the case of the feed pressure, reduce the feeding speed product will be finer, improve the feed speed product will become thick. In the case of the feed speed, it will improve the granularity of the pulverized pressure product will be thinner and reduced.Small crushing pressure, the product will become thick.

　　So the particle size control is the adjustment of the parameters of the fluidized bed airflow in the pulverization process to achieve different pulverized fineness, and it is necessary to measure the relationship between the feed speed and the pressure before crushing and then determine the appropriate pulverization parameters. To achieve the particle size requirements of our customers.

　　The particle size size of the final product needs to be used to check the fineness and distribution in the particle size detector. In addition, it can be more accurate comparison with electron microscopy, and of course, it is also possible to compare the detection result of the internationally known particle size detector.

　　Fluidized Bed Airflow Crusher Machine Main Part: It is standard for a vertical turbine classifier, crushing, grading mutual cooperation, synchronous completion, and adjust the product fineness by frequency conversion adjustment of the speed of the classifier. Such as a processing process, a plurality of particle size products can be applied to two to four on the basis of standard a hierarchy, making this unit a two-unit-five-line machine for a pulverized grade.

　　Fluidized Bed Airflow Crusher Application: The pulverization mechanism of this machine determines the characteristics of its wide range of applications, high finished products, typical materials are: super hard diamond, silicon carbide, metal powder, etc., high purity requirements : Ceramic color, medical Yao, biochemical, etc., low temperature requirements: doctor Yao, PVC. By changing the normal air of the air source to nitrogen Qi, carbon dioxide gas, etc., the unit can be used as an inert gas protection device, which is suitable for pulverization grading processing of materials such as flammable and explosive, easy oxidation.

　　General principles of fluidized bed airflow pulverizer airflow pulverized: the dry and oil-free compressed air or superheated steam accelerates to the supersonic airflow through the Lavar nozzle, and the discharged high-speed jet belt animal material is high-speed motion, so that the particles mutual Collision, rubbing and pulverized. The pulverized material reaches the grading area with the airflow, and the material to achieve the fineness is finally collected by the trap. It does not reach the required material to return to the pulverizing chamber to continue to be pulverized until the desired fineness is reached and traps.

　　ALPA7 * 24-hour customer service hotline and 150+ service engineer ready to stand up, production lines can complain about feedback, ALPA will give technical advice within 30 minutes, give back to complaints within 12 hours, A clear solution is available within 24 hours, and the fault site is available within 3 days (foreign 10 days).