Airflow pulverizer must strictly abide by the instructions and regular maintenance

　　Ultra-micro gas flow grinding is to overcome the internal cohesive force of the solids in the internal cohesion of the solids by mechanical or fluid power, thereby pulping 3 mm or more of the material particles to 10-25 microns. It was a high-tech of a material processing that was generated by the development of modern high-tech after the 1970s.

　　During airflow pulverizer, the powder is mainly against the powder to achieve powder refinement by high pressure airflow to achieve powder refinement. Due to its simple structure, no cutters, grinding discs, etc., which can safely operate safely, and have a high degree of automation, extensive applications such as military, food, medicine, chemical, and new energy.

　　When the airflow pulverizer is used, it is necessary to strictly abide by the instructions to operate, and the key issues that need to be paid to: 1. Equipment is uniform and continuous, to ensure crushing There is a constant material supply in the room to meet the concentration requirements of the material crush.

　　2, the material into the gas flow crusher should be as small as possible, first pre-pulverizing the material, so that the discharge speed and the delivery fineness can be improved.

　　3. For maintenance maintenance of airflow pulverizer, it should be noted that the machine does not stop, so as not to do hazardous operations to avoid serious consequences. Impurities can not be mixed in the raw material, such as iron, sand, etc. to avoid damage to the equipment. The equipment should be lubricated in accordance with the regulations to extend its service life. Machine equipment is strictly prohibited with hyperproof and overload, which is extremely difficult to damage the equipment.

　　During the use of the airflow crusher system, periodic maintenance and maintenance should be performed, so that it is stable, reducing fault downtime, and increases the utilization of gas flow.

　　The equipment uses maintenance staff to pay attention to and timely equipment lubrication, ensuring the normal operation of the entire system and the service life of the equipment.

　　The bearing portion of the pulverizer is very easy and broken, and the wear is relatively large in use, so it is necessary to maintain frequent maintenance, often refueling to increase the life of the bearings.

　　In addition, the temperature in winter is too low, the working environment has become difficult, and many production lines work environment is in open-air production materials, and the mechanism of the bearing is easy to freeze, and often pay attention.

　　To ensure the good working condition of the airflow pulverizer, reduce the wear of airflow pulverizer, extend the service life, and reduce unnecessary energy consumption, need to useThe raising personnel can do regular maintenance, correctly handle the relationship between maintenance and repair, and do not allow only non-raise or only repair.

　　Currently, artificial intelligence and Internet of Things have been more and more fields, and AlPa Powder Technology is an industrial powder equipment manufacturer that has always adhered to technological innovation, in artificial intelligence and I have also explored the application of the Internet of Things.