Processing high purity material requires regular cleaning airflow pulverizer

　　The full protective ceramic liner airflow pulverization charter has the following performance advantages: dry pulverization of various materials suitable for the Moh's hardness 9 or less, is particularly suitable for high hardness, high purity, and high value-added materials. The breakthrough of particle acceleration technology has greatly improved pulverization efficiency, reduced energy consumption, small pulverization, good particle shape, and no large particle size and no large particles, and the product particle size D97 = 3-74 microns were arbitrarily adjusted. During the pulverization, due to the sharp expansion of the airflow, the airflow temperature is lowered, especially suitable for the heat sensitive, low melting point and the volatile material. The material collides with each other, which is different from mechanical pulverization relies on the impact of the material or a hammer, and plus all-round ceramic liner, so the equipment is small, and the product is purity. It can be used in series with multi-stage airflow classifiers, and products producing multiple particle size sections at a time. The ceramic liner is pulverized, the equipment is compact, the disassembly and cleaning is convenient, and the inner wall is smooth without dead angles. The entire system is fully negatively pressed, no dust, low noise, clean environmental protection.

　　Airflow pulverizer used in industrial belongs to new environmental equipment. Why is the airflow crusher is an environmentally friendly equipment? Because it can do negative pressure closed operation during processing, effectively prevent dust leakage, protect the environment from dust pollution, but also cause disease due to long-term inhalation of dust. There is also a significant feature of the airflow pulverizer that there is no impurity pollution, which is suitable for materials with high purity, but it should be noted that after each use is used, it needs to be thoroughly cleaned, otherwise it will easily cause bacterial breeding, resulting in material Pollution.

　　How to thoroughly clean the airflow pulverizer, which requires you to introduce you as a senior manufacturer's Shandong Er.

　　1. The airflow pulverizer is over, turn off the power, and sends all materials in the production to the intermediate station according to the material entry and exit program. Hanging equipment to be cleaned.

　　2, turn on the chemical airflow pulverizer, remove the recovery bag, screen, detachable wind tube, etc. into the cleaning sink. Inject about 2/3 volumes of 30 to 40 ° C in the sink, soaked for 10-30 min, and then remove the pink bag in front of the purge bag to the purge bag clean;

　　3, screen, Drainage is cleaned with soft brush to clear the water, with ion waterFlush three times. Dry in the same level in the same level in the same level, spare.

　　4, with clean special wipes to take warm water, import the crusher material, pulverized the inner cavity, the material exit, and the seasoning room repeatedly wiped clean.

　　5, use deions to clear the internal walls of the chemical crusher and the fluid, and the cyclone separator thoroughly wiping clean.

　　6, use clean dry towels to dry the above parts, and then wipe clean with 75% ethanol.

　　7, Wipe the floor, power distribution cabinet, motor, and operator cabinet. After the bag is dried, the screen is installed in the reverse order of the dismantling. Cleaning, flushing interposes to the ground without dust, water.

　　The cleaning work of the airflow crusher is very important, so everyone must pay attention! Shandong Erse specializes in the production of gas flow crushers for 23 years, accumulating up to 10,000 success cases, the equipment produced with high-precision, high efficiency technology advantages in various fields, we also produce airflow classifiers, mechanical Impact grinding, inert gas protection equipment, etc., equipment models, can meet different machining requirements of users.

　　Quality Miles are ALPA Powder Technology to give back to the country 's thousands of customers to have a groundbreaking activity that is favored by AlPA brands. For many years, AlPa Powder Technology adheres to the "service value-added, shared value" commitment, leaping thousands of mountains, walking through the motherland, north, north, unhappy, only for the first line of customers, communicating with customers, and establishing long-term cooperative relations with customers . The event not only improved the customer satisfaction of the ALPA brand, but also consolidated the status of airflow crusher products produced in Alpa production in the national market.